Supply, installation and support across Oman
Manage access to your office, server room, business premises or warehouse. TAOMAN provides and installs face, fingerprint, card and PIN access control systems across Oman, from single-door systems to multi-door systems managed from a central point.
Single-door access control systems begin at approximately 150 OMR, based on the reader, lock, door type, cabling and installation.
The price shown is for a fully installed system. Device prices are indicated separately.
Start with the entrance
Decide on the number of entrances and which type to control. A small business will most likely require a single controlled office door. Larger sites may need multiple doors, central software, entry schedules and detailed records.
A complete single-door system typically consists of an access control reader, electric lock, exit button, power supply with backup battery, cabling, installation and user setup.
This option is suitable for office entrances, server rooms, finance rooms, clinics, shops and small warehouses.
Get a Single-Door PriceMultiple doors may be controlled by a single system. Staff may be granted access to certain doors at certain times, while administrators can add users, deny access and view entry logs from central software.
This option is recommended for larger offices, factories, warehouses, schools, clinics and restricted departments within a business.
Request a Multi-Door QuoteMany face and fingerprint terminals can record staff attendance and open a door using the same device. This can save the business money on equipment and provide one system for entry and attendance reports.
Not all door readers are attendance machines, and not all attendance machines should be connected to a lock. Before quoting, TAOMAN verifies the exact capability of every model.
Compare Attendance & Access Control MachinesTAOMAN can configure access control for pedestrian turnstiles, vehicle gates and authorised lift floors.
These systems are quoted based on the site, number of lanes or entry points, integration needs and required security level.
Request a Site AssessmentInstalled system estimates
Final pricing depends on the number of doors, type of reader, lock, door material, cable route, software and integration needs. The following figures are estimates only and not a final quotation.
| System | Typical Price | What It Is Suitable For |
|---|---|---|
| Single-door access control | 150–400 OMR installed | One office, clinic, shop, server room or restricted room |
| Additional door at the same site | 150–350 OMR installed | Expanding an existing system |
| Multi-door system with software | Quoted per site | Several doors, departments, buildings or branches |
| Tripod or flap turnstile lane | 800–2,500 OMR | Staff entrances, gyms, factories and reception areas |
| Boom barrier access control | 350–1,200 OMR | Car parks, compounds, warehouses and vehicle entrances |
| Lift floor access control | 300–800 OMR per lift | Hotels, office towers and multi-tenant buildings |
Get a written estimate before selecting a system. A low device price does not cover the lock, exit button, power supply, brackets, cables, installation or configuration.
Some attendance and access control machines start from around 40 OMR when bought as a device only. This does not necessarily mean a complete controlled door costs 40 OMR.
The installed price must include the correct lock, exit hardware, power, brackets, cables and labour.
Send a Door Photo for an Accurate PriceOffice entry and restricted rooms
An office access control system uses face recognition, fingerprints, cards or PIN numbers instead of an unsecured key. The business determines who is allowed in, which doors they can use and when their access should work.
Most offices start with the main entrance, followed by other spaces such as server rooms, finance rooms, management offices, stock rooms and document storage rooms.
Face, fingerprint, card or PIN can be used to access the main office entrance. Visitors can still enter through reception or receive temporary access when necessary.
Only authorised employees can enter sensitive internal rooms. Access may be revoked immediately when an employee leaves the company or moves to a different department.
The system can be set up to log who enters, which door they use and the time. Larger systems can also apply schedules, such as allowing cleaners access only during assigned hours.
A standalone reader can be used in a small office. A company with several doors, floors, offices or branches may require central software and connected controllers.
Verifies the user’s face, fingerprint, card or PIN number.
Secures the door and unlocks it once valid access has been confirmed.
Allows people inside the premises to leave without presenting a credential.
Provides stable power and temporary battery backup during a power outage.
Controls users, doors, schedules and reports when the project calls for central control.
Face recognition is contactless and quick. It can be used at busy entrances, offices, factories and locations where users’ hands may be dirty or gloved.
Fingerprint access is inexpensive and common in indoor offices. It works best where users’ fingerprints are clean and the device is protected from harsh outdoor conditions.
Cards can easily be issued to staff, visitors and contractors. If a card is lost, it can be cancelled without changing the lock or affecting other users.
PIN access may be used alone or as a backup method. Higher-security systems may require both a card and a PIN.
Some access control devices support several methods. TAOMAN recommends the entry method based on the users, installation environment, security requirements and budget.
One device, two functions
Many face and fingerprint terminals can simultaneously record employee attendance and control a door. The device can unlock the door and record attendance when an authorised employee enters.
This is helpful for offices that want to use one device for employee entry and attendance reporting. The complete setup still requires the correct lock, exit button, power supply, brackets and installation.
Confirmed door-control capability
Only products confirmed to support door access are shown here. The device-only price is clearly distinguished from the complete installed cost and excludes the lock, exit button, power supply, brackets, cables and installation.
Attendance + Door Access
Device-only price65 OMR
Complete installed priceQuoted after checking the door
Need a machine mainly for attendance reports? View all attendance machines and prices.
The reader is just one component of the installation. The lock and brackets should match the door material, frame and opening direction.
Frameless glass doors typically need matching glass-door brackets and a lock that can be attached without causing damage. A site check or clear door photos must be provided before quotation.
An electric strike, magnetic lock or another suitable electric lock may be used on wooden doors, depending on the frame, latch and required security level.
The brackets, cable route and lock position must be correct for metal and aluminium doors. Before installation, the installer must verify the door frame and opening direction.
TAOMAN provides access control products from ZKTeco, Hikvision, Suprema, Virdi and HID. The right brand depends on the number of users, number of doors, preferred identification method, software needs, integration requirements and budget.
Do not select a system based only on the brand name. Verify the door type, reader capability, software, credential technology and future expansion needs.
TAOMAN’s head office is located in Ruwi, Muscat, and the company provides and installs access control systems across Oman, including Muscat, Sohar, Salalah, Nizwa, Sur, Duqm, Barka and other areas.
For work outside Muscat, provide the site address, door count and project information so travel and installation requirements can be included in the quotation.
Verified TAOMAN project
A complete single-door access control system typically ranges from 150 to 400 OMR, including the reader, suitable lock, exit button, power supply, cables and installation. The final price varies depending on the door and equipment used.
Many face and fingerprint attendance machines can also control a door, but this capability must be verified for the specific model. A complete installation also requires a lock, exit button, power supply, brackets and cables.
A standalone reader may be enough for one small office door. Software is helpful when there are multiple doors, you need to manage users from a central point, you want schedules or you require detailed entry reports.
Face recognition is contactless and fast. Fingerprint is affordable for clean indoor offices. Cards are simple to issue and cancel. A PIN may be used alone or with another method. The best choice depends on the users, environment and security requirements.
Glass doors require a suitable lock and brackets selected according to the glass, frame and opening direction. Send well-lit, clear photos of both sides of the door for a preliminary review.
TAOMAN supplies and installs access control systems in Muscat and other parts of Oman. Travel and installation requirements are confirmed in the quotation.
A straightforward single-door installation can often be completed within the same working day. Multi-door systems and projects with longer cable runs, controllers or integrations take longer.
This depends on the hardware and software selected. Some devices can manage attendance and door access simultaneously. Larger systems can also connect to CCTV, alarms, turnstiles, gates or lift controls.
Door photos make pricing faster
Send the number of doors, site location, approximate user count and photos of both sides of each door. Mention whether you need attendance, central software, cards, face recognition, fingerprint or PIN access.
